Operation:
1. Firstly remove the yellow plastic token& replace the coin to the clamp.
2. If use RMB 1. please switch (SW3) to RMB Only
3. Choose N.O(Normal Open) or N.C(Normal Close) in coordination with the machine specification. (Normally Mario Machines should be N.C, Gaming Machines be N.O )
4. Switch to “SW2”:
Fast: 25ms/short pulse signal (Apply to Mario Machine)
Medium: 50ms/medium pulse signal (Apply to different machine)
Slow: 100ms/long pulse signal (Apply to entertainment machine)
Notice: If coin-eating , please adjust the switch.
5. VR turning for sensitivity of coin acceptance: turn clockwise(+)for strict coin selecting anti-clockwise(-)for slack.
6. Lines guide of connector:
1)Gray Wire
Red Wire DC+12V
2)White wire COIN Signal
3)Black wire Ground
4)Gray Wire