打印
Specification
2-VT21

GD-VT2.1 Time control board working with coin acceptor

 

 

Model:GD-VT2.1
Voltage: 12v DC DC10-15V
Support: Support any GD coin acceptor and Bill Acceptor as long as it can output pulse signal
Apply to: vending machine, wash machine, game machine, shoe cleaning machine, TV, Massage chair, petrol filling station , automatic battery recharge, PC, etc.
Details

GD-VT2.1 Time control board working with coin acceptor

 

Model:GD-VT2.1
Voltage: 12v DC DC10-15V
Support: Support any GD coin acceptor and Bill Acceptor as long as it can output pulse signal
Apply to: vending machine, wash machine, game machine, shoe cleaning machine, TV, Massage chair, petrol filling station , automatic battery recharge, PC, etc.
Voltage detect / Time contro output(relay)
+ -
(SET) (ENTER)
Function: timing control, time delay, voltage detect, time add (cumulation ) function such as 1+2+5=8 ,pulse trigger time board.
-GND/+pulse input
Time range: LED show 1-999 minutes, 1-999 seconds,
Voltage detect: LED show 0-99.9V or 0-9.99V
Pulse signal
Switch signal
The mode display: P-1 should be selected in common.
- GND
Power
+ 12v
 
P-1 Timing relay mode
P-2 Time delay relay mode
P-3 Voltage control relay mode
P-4 Voltage & time control relay mode
Set Time
  1. short press SET into P-1[timing control mode],
2. press ENTER,LED shows 000.
(T1=000,Operating time,T2=000,Releasing time)
3. short press SET, 000, 0 twinkles, into T1.
Press ENTER to program operation time 1-999 sec or
Minutes, decimal point twinkle=minutes, without it=second
4. short press SET 4 times into T2, ENTER to set.
5. short press SET to set circulation times.
6. short press SET to exit set status, and into operation.